Welcome!
Fujitsu T4220 Tablets
When hooked up to the projector, your tablet may lose the picture on either the monitor or the projector when you convert the laptop to tablet mode.
To correct this, you will need to enter the display preferences by right-clicking on your desktop and selecting Properties. To right-click with the pen,
use the button closest to the tip of the pen and tap on the screen.Before you begin, make sure you have connected the tablet to the projector.
Click on the Settings tab and then the Advanced button.
Click on the Intel(R) Graphics Media Accelerator Driver for Mobile tab and then on the Graphics Properties... button.
On the Display Devices tab, select Intel(R) Dual Display Clone to get the same picture to appear on both the monitor and the projector.
On the Display Settings tab, set the Notebook rotation to 180.
This will configure your tablet so that the top of the screen is where the video cable plugs in.
If the image is up-side-down on the projector, select the Monitor tab at the top and set the rotation to 0.
This will rotate the projector image so that it is right side up.
Once everything's all set, click Apply and then OK